Five U.S. pressure washer recalls make the power cord the first check

The spray lance is the obvious part of an electric pressure washer. Across five U.S. recalls announced in August, however, the decisive detail is on the other side of the machine: its power cord.

The U.S. Consumer Product Safety Commission says the affected YERYORK, Steelite, Workbless, SUGIFT and COMMOWNER washers lack an integral ground-fault circuit interrupter, or GFCI, and have an inadequate-length cord. The agency says those deficiencies create shock and electrocution hazards. Its instruction in every notice is to stop using the recalled product immediately and contact the named company for a full refund.

Together, the five actions cover 4,335 units sold in the United States. An additional 657 Workbless units were sold in Canada. No incidents or injuries had been reported in any of the five U.S. notices when they were published.

The two newest recalls were dated 27 August. YERYORK's action covers 300 green-and-black, 2.5 GPM washers identified as model YE-006. The model number is on a label near the handle, and only units without a GFCI are included. They were sold on Amazon from March 2025 through June 2026 for about $120.

The Steelite recall covers about 128 red-and-black 2.5 GPM machines. Model AZ6041VC is printed on a label on the back. Longer 3D sold them on Amazon from April through June 2026 for between $45 and $92.

A week earlier, the CPSC recalled about 2,200 Workbless washers in the United States. The green-and-black machines carry model numbers WB0301 or WB0302 on rear labels. They were sold from April 2025 through July 2026 through Amazon, Best Buy, Kohl's, Lowe's, Overstock, Target and Walmart, at prices from $97 to $140.

Two recalls dated 13 August complete the group. COMMOWNER's action covers 1,694 orange, green or blue machines with black parts. The rear label shows model HD14P-Z, while the product may have been listed online as HX18. They were sold on Amazon in April 2026 for about $150.

The SUGIFT action is much smaller, at 13 orange-and-black washers. Model LTBBHG006 does not appear on the product, according to the notice, but it was used in the Best Buy online listing. Those machines were sold from July 2025 through July 2026 for about $155.

Appearance can narrow a search, but it cannot confirm a match. Several products share green-and-black bodies, hoses, nozzles and foam cannons. The useful evidence is the brand, model label where one exists, retailer and purchase period. For the SUGIFT model, the order record matters because the published model number is not printed on the machine.

A GFCI is not simply another name for the earth pin on a plug. OSHA describes it as a fast-acting circuit breaker that compares the current travelling to equipment with the current returning from it, then interrupts power when it detects a small imbalance. The CPSC notices concern integral protection on these specific pressure washers, alongside their cord length.

That distinction sets a firm boundary for owners. None of the five notices offers a test, adapter or household electrical setup as an alternative to the recall. A wall outlet, an extension lead or the appearance of a plug is not a substitute for confirming the brand and model through the live CPSC notice. The published remedy is a refund, not a retrofit.

The official descriptions are also precise about scope. They do not say that every electric pressure washer without a visible box on its cable is recalled. Nor do they identify affected units solely by hose length, flow rate or colour. The generated illustration on this page is deliberately unbranded and cannot be used as a product-identification photograph.

Each company asks the consumer to document destruction of the recalled washer by cutting its power cord, submit a photograph and then dispose of the product. Crucially, the notices specify that the machine must be unplugged before the cord is cut. This article is not a substitute for those instructions and does not provide an electrical or disposal procedure.

The safer route is to start with the matching live CPSC page and use the contact listed there. That preserves the correct company, model scope and evidence requirements. It also avoids acting on an old marketplace listing, a copied contact address or an image that merely resembles the product.

The absence of reported incidents is useful context, but it does not cancel a confirmed recall. These actions are based on the product deficiency identified by the regulator, not on whether an individual machine has already failed.

Five notices in three weeks make this more than a colour-matching exercise. The wand may explain what the appliance does, but the label and power cord now determine what should happen next.